1. Glass Layer Thickness for Wind Load Resistance → Did you know that thicker glass doesn't necessarily have to be on the exterior? Contrary to popular belief, just because the wind is coming from the outside doesn't mean the thicker glass in the sealed unit has to be positioned on the exterior. Considering that thick glass with low-E insulation is very expensive, if the low-E is on the exterior, the thick glass can be positioned on the interior. 2. Position of Setting blocks and/or Reinforcement in Horizontal Mullions When the glazing is heavy, the horizontal mullion deforms. This deformation should generally be limited to L/360 or a maximum of 3 mm. To meet this requirement, the setting blocks can be moved closer to the corners of the glazing, but never closer than 150 mm. It is also possible to add a steel reinforcement to the horizontal mullion. 3. Glass Tint → If a 10mm glass layer and a 6mm glass layer are required on one or more large sealed units of a curtain wall, ...

  *This podcast is only available in French with English subtitles Here are the topics covered in this podcast: Introduction to glass guardrails (balustrades) and glass walls acting as guards Building codes and risk analysis The fundamental principle of redundancy Design choices and cost optimization Management of operable windows and wind impact Public safety Conclusion and early integration of engineering A special thanks to Vincent Roy & Marie-Pier Blanchet  from RG Dessin for inviting us to this podcast!

We were recently at the AVFQ congress in St-Hyacinthe and it was a very interesting activity. We're very happy we could also go to the "get together" the evening before it started, meeting so many people in our industry always feels great. Thanks to the AVFQ for organizing this event!  Plus, our Glaspex logo is front and center in the photo 🧐  Can't wait for the golf tournament to meet you all again!